- Movaghate, S., Abdelnaby, A. (2016) “Advancements in Fragility Analysis using Numerical Calibration Methods for a Horizontally Curved RC Bridge,” Engineering Structures, Vol. 125C, pp. 236-243. (DOI: 10.1016/j.engstruct.2016.07.017). view article online

- Abdelnaby, A., Elnashai, A. (2015) “Numerical Modeling and Analysis of RC Frames Subjected to Multiple Earthquakes,” Earthquakes and Structures, An International Journal Vol. 9, No. 5 pp. 957-981. (DOI: http://dx.doi.org/10.12989/eas.2015.9.5.957).  view article online

- Hosseinpour, F., Abdelnaby, A. (2015) “Statistical Evaluation of the Monotonic Models for FRP Confined Concrete Prisms," Advances in Concrete Construction, An International Journal Vol. 3, No. 3 pp. 161-185. (DOI: 10.12989/acc.2015.3.3.161).  view article online

- Abdelnaby, A., Frankie, T., Spencer, B. (2014) “Numerical and Hybrid Analysis of a Curved Bridge and Methods of Numerical Model Calibration,” Engineering Structures, Vol. 70C pp. 234-245 (D.O.I. 10.1016/j.engstruct.2014.04.009).  view article online

- Abdelnaby, A., Elnashai, A. (2014) “Performance of Degrading Reinforced Concrete Frame Systems under Tohoku and Christchurch Earthquake Sequences,” Journal of Earthquake Engineering, Vol. 18(7) pp. 1009-1036 (DOI:10.1080/13632469.2014.923796).   view article online

- Spencer, B., Chang, C., Frankie, T., Kuchma, D., Silva, P., Abdelnaby, A. (2014) “A Phased Approach to Enable Hybrid Simulation of Complex Structures,” Earthquake Engineering and Engineering Vibration, Vol. 13 pp. 63-77 (D.O.I. 10.1007/s11803-014-0240-2).  view article online

- Abdelnaby, A., Elnashai, A. (2013) "Integrity Assessment of the Pharos of Alexandria during the AD 1303 Earthquake," Engineering Failure Analysis, Vol. 33c, pp. 119-138.  view article online

- Abdelnaby, A., Frankie, T., Spencer, B. (2013) "Numerical Hybrid Simulation Modeling Verification for a 3-Pier Bridge,” Journal of Systemics, Cybernetics and Informatics, Vol. 11(5), pp. 48-51.   view article online

- Abdelnaby, A., Machaly, E.S., Safar, S., "Parametric Analysis of Plate Girder Web Panels Subjected to Pure Shear", Journal of Engineering and Applied Science, Vol. 54, December 2007.   view article online

- Abdelnaby, A., Machaly, E.S., Safar, S., "New Design Rules for Plate Girder Web Panels Subjected to Pure Shear", Journal of Engineering and Applied Science, Vol. 55, February 2008. view article online

- Abdelnaby, A., University of Illinois at Urbana-Champaign, PhD Dissertation (2012): Multiple Earthquake Effects on Degrading Reinforced Concrete Structures. view dissertation online

- Abdelnaby, A. “Fragility Curves for RC Frames Subjected to Tohoku Mainshock-aftershocks Sequences,” (under review).

- Toros, C., Oyguc, R., Abdelnaby, A. "Seismic Behavior of Irregular Reinforeced-Concrete Structures under Multiple Earthquake Excitations," (under review).

- Ghaffari, Y., Pezeshk, S., Abdelnaby, A. “Evaluation of Load Increase factor in Progressive Collapse,” (in preparation).

- Ismail, A., Abdelnaby, A. (2014) "High Resolution Seismic Investigation of a Structural Failure in South Illinois, USA", submitted for review.

- Abdelnaby, A., and Amr Elnashai (2010) "Response of RC Buildings under Multiple Earthquakes", the 7th International Conference on Urban Earthquake Engineering & 5th International Conference on Earthquake Engineering, Tokyo, March 2010.

- Abdelnaby, A., Frankie, T., and Spencer, B. (2012) “Hybrid Simulation Modeling of a Curved Bridge”, Design and Modeling in Science, Education, and Technology, Orlando, FL.

- Abdelnaby, A. (2012) “Performance of RC buildings under the March 11 Earthquakes in Japan,” Earthquake Engineering Research Institute, Memphis, TN.

- Abdelnaby, A., and Amr Elnashai (2012) "Response of Degrading RC Frames Under Replicate Motions”, the 15th World Conference in Earthquake Engineering, Lisbon, Portugal, September 2012.  view article online

- Frankie, T., Abdelnaby, A., Silva, P. (2013) “Hybrid Simulation of Curved Four-Span Bridge: Comparison of Numerical and Hybrid Experimental/Analytical Results and Methods of Numerical Model Calibration,” Structures Congress, Pittsburg, PA, pp. 721-732.  view article online

- Abdelnaby, A. (2013) “Methods of Bridge Numerical Model Calibration Using Hybrid Simulation,” Quake summit, Nevada, Reno.

- Assadollahi, A., Abdelnaby, A. (2014) “Improved Student Understanding of Materials and Structures through Non-Traditional Laboratory Project,” American Society of Engineering Eduction (Southeastern Section), Macon, GA.  view article online

- Abdelnaby, A., Raji, F., Yohannes, A., Naimi, A., Mishra, S., Golias, M. (2014) “Impacts of the 1811-1812 Earthquakes on Existing Transportation Networks in Memphis Area.” Tenth U.S. National Conference on Earthquake Engineering, Anchorage, AK.  view article online

- Hosseinpour, F., Abdelnaby, A. (2015) “Statistical Investigation of the Behavior of FRP Confined Concrete Prisms Based on Experimental Data,” Structures Congress, Portland, OR, pp. 2260-2271.

- Movaghati, S., Abdelnaby, A. (2015) “Semi-rigid Steel Connection with Self-centering System,” Structures Congress, Portland, OR.

- Hosseinpour, F., Abdelnaby, A. (2015) “Statistical Evaluation of the Compressive Strength Models for FRP Confined Concrete Rectangular Prisms using Experimental Data,” Earthquake Engineering Research Institute, Boston, MA.

- Movaghati, S., Abdelnaby, A. (2015) “Experimental and Numerical Analysis of Semi-rigid Connections with and without Self-centering Devices,” Earthquake Engineering Research Institute, Boston, MA.

- Ghaffari, Y., Pezeshk, S., Abdelnaby, A. (2015) “Improved Value for Load Increase Factor in Disproportionate Collapse,” Structures Congress, Portland, OR.

- Movaghati, S., Abdelnaby, A. (2016) “Use of self-centering system to retrofit steel flexible moment connections,” Geo-Structures Congress, Phoenix, AZ.

- Hosseinpur, F., Abdelnaby, A. (2016) “Inelastic behavior of structures under multiple earthquakes,” Geo-Structures Congress, Phoenix, AZ.

- Rostamiam, M., Abdelnaby, A. (2016) "Reliability analysis of steel frames under earthquake loading using Meta-models," Joint Engineering Mechanics Insitute and Probablistic Mechanics & Reliability Conference, Vanderbilt, TN.

- Abdelnaby, A. (2010) “Material Model Implementation in Zeus-NL”, Mid America Earthquake Center, Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, http://code.google.com/p/zeus-nl/wiki/06MaterialModelImplementation

- Abdelnaby, A. (October, 2011) “Earthquake Magnitude and Energy Release”, AAAEA Newsletter, Chicago, IL.

top